Scubapro Hydros Pro BCD Package

The Scubapro Hydros Pro is a very versatile BCD, capable of being converted from a full on BCD with all the trimmings to a streamlined travel BCD in no time. To find out how these work, please read on or return to the product page and watch the second video about customising the Hydros Pro.

If you want to change it’s colour you can buy a Colour Kit. We strongly recommend purchasing the Hydros Pro Tool if you do want to change the colour kits or accessories as it makes the job much easier.

All the other accessories attach to the ‘Multi-Mount Accessory Matrix’ of which there are four, two on each side of the BCD above and below the weight pouch. This means you can choose up to four accessories to attach to the BCD:

The Mini D Ring Set provides a fixing point for carabiners, octo clips or the optional Bungee Mounts that can be used to stow an SMB or torch. These can be attached on the top or bottom fixing points on either side of the BCD.

If you want to attach a knife then you’ll need the Knife and Accessory Plate which operates with either the White Tip or Mako knife. Again, this can be attached to either side of the BCD on the top or bottom

Finally you have the option to attach a pocket. There are 2 to choose from, the Ninja which is a smaller drop pocket or the Cargo which is a decent size thigh pocket that straps to the leg as well. Both attach only to the lower fixing points of the BCD on either side.

As an example, you could have two pockets on either side of the BCD along with a knife and a mini D ring mount on the top fixing points on either side.

Use this package builder to customise your Hydros Pro with all the accessories you want.