Free UK Tracked Shipping on Orders Over £50*

Plankton Points Club. Learn more

3 Reviews
Scubapro  |  SKU: 12.620.300

Scubapro MK25 EVO / S620Ti Regulator

£790.00 £880.00

Members earn 1,580 Points when they buy this item. Sign up or log in.


The MK25 first stage has a balanced through-flow piston design that is capable of delivering incredible gas flow rates regardless of depth, cylinder pressure or breathing rate. The first stage uses a combination of anti-freeze coatings and components to meet and surpass the requirements for cold water rating. It is fitted with four low-pressure high flow ports around the outside of a swivelling turret and a fifth port on the end that provides optimal hose routing for technical diving. Two high-pressure ports are incorporated into the main body.

The S620Ti second stage is an evolution of the S600. Still, it features a new titanium valve inlet tube that is lighter and corrosion-resistant and a smaller housing design that utilises the same diaphragm as the S600 for outstanding performance. The second stage uses a pneumatically balanced valve design for a smooth breathe that can be tailored by adjusting the inhalation effort control knob. There is also a lever to adjust the venturi effect with the housing, allowing it to be switched to Pre-Dive for water entry and reduced risk of freeflow or Dive mode for optimal performance and gas flow to the mouthpiece.


VIDEO CONSULTATIONS NOW AVAILABLE: We're bringing our highly experienced and knowledgeable staff to you with live-streaming consultations. If you need help choosing the right bit of kit or the best size before buying or even advice on whether a purchased item is the right fit for you, then book yourself a consultation appointment.



Features

First Stage

  • Air-balanced flow-through piston design
  • Patented XTIS (Extended thermal Insulating system)
  • Key insulation system components are visible in blue
  • Anti-freeze protection radically increases breathing reliability
  • Two opposing high-pressure ports allow the first stage to be positioned either up or down
  • Four high-flow and one axial super high-flow low-pressure ports
  • DIN version comes with a dual-compound wheel
  • Airflow at 200bar: >8500 l/min
  • Intermediate pressure: 9.0-9.8 bar

Second Stage

  • Air-balanced valve smooths out the inhalation effort
  • Rugged reinforced technopolymer case and front cover
  • Titanium barrel is rugged, anti-corrosion and lightweight for long-term reliability.
  • Uses the S600s large-diaphragm inside a compact casing for maximum breathing sensitivity
  • User controls include an easy-grip diver-adjustable inhalation effort knob and Venturi-Initiated Vacuum Assist (VIVA) lever.
  • Super-flow hose features an oversized bore that allows more air to flow on each inhalation
  • The ultra-comfortable compact orthodontic mouthpiece is easy to grip yet doesn't inhibit airflow
  • Airflow at 200bar: 1850 l/min

Please note: We cannot ship Scubapro items outside the EMEA - Learn more

Based on 3 reviews
Write Review
Clear Filters
Order By
Newest First
Oldest First
Most Popular
Highest Rating
Breakdown
3
0
0
0
0
Verified Customer
Adrian J
"Excellent 1st and 2nd Stages"
Scubapro MK25 EVO / S620Ti Regulator DIN
Scubapro have really done it again. The MK25 EVO and S620 Titanium is an absolutely splendid combination. Incredibly reliable and easy to breathe from, I wouldn't use anything else other than Scubapro.
Was this review helpful?
Yes
Report
Share
7 years ago
Verified Customer
Luke S
"Would recommend"
Scubapro MK25 EVO / S620Ti Regulator DIN
I've used this combination for nearly 100 dives and it works brilliantly. I have the DIN with the travel Scubapro A clamp adapter to keep options open depending where I dive. The 1st stage can be used so that it either has a higher or lower profile while attached to the tank depending what you prefer. I am.about to come around to having it serviced for its 100 dives and the only thing that is concerning me is the chat about the difficulties of it, and this has come from 3 different scubapro service technicians so we shall see how this turns out. The s620ti is great for different underwater conditions. Depending what conditions I've been in or how I'm feeling the ease of changing the viva system on the side to make breathing easier is fantastic. It is also extremely durable. I can definitely recommend both of these products.
Was this review helpful?
Yes
Report
Share
7 years ago
Verified Customer
Andreas L
"WOW! Huge improvement over the MK17\/S600"
Scubapro MK25 EVO / S620Ti Regulator DIN
I've switched to a twinset and bought this set in addition to my existing MK17/S600. There is a huge difference between the two, the MK25/S620Ti delivers a lot more air and with a lot less work of breathing that the MK17/S600. Really pleased with it!
Was this review helpful?
Yes
Report
Share
8 years ago

New content loaded

WhatsApp