Fourth Element G1 Dive Glove Liners

Free UK delivery on all orders over £50

To receive on, order within
0 day(s)
0 hr(s)
0 min
0 sec
Choose Next Day Delivery at checkout (in stock items)

Available 3 - 4 days

Size Guide
Fourth Element Diving Gloves Size Chart

Use this size guide to find the best size for your Fourth Element Gloves. Please remember that this is a guide only and we strongly recommend that you check for correct fit before using for the first time.

Gloves Sizing Inches Cm
XS 6.75 - 7.5" 17 - 19
Small 7.5 - 8.25" 19 - 21
Medium 8.25 - 9" 21 - 23
Large 9 - 9.75" 23 - 25
X-Large 9.75 - 10.5" 25 - 27
XX-Large 10.75 - 11.5" 27 - 29

Glove size by width: measure the dominant hand as it is likely to be larger. Wrap a tape measure around the palm of the hand just below the knuckle make a fist and take the measurement.

  • Description

    The Fourth Element G1 Dive Glove Liners' design allows them to be used under drygloves or wet mitts.

    In the case of dryglove failure, the 1.5mm hydrofoam makes sure the liners will still retain some of the thermal protection they offer when dry. They also have a bamboo derived fabric liningm inside which provides further thermal protection.

    Fourth Element G1 Dive Glove Liners can be used with thinsulate gloves in a layering system under the drygloves for extremely demanding diving conditions.

  • Reviews
  • Returns


    If you change your mind, it doesn’t fit, or you become inflicted with buyer’s regret - that's OK!

    Mike's Dive Store offer an extended returns policy of 30 days - so you can be rest assured if the suit, piece of diving equipment or gift doesn't suit then just send it back and we will either exchange it or offer a full refund less any postage costs. Too easy!

    Please note that there are some special order items on our website that will be subject to a 20% re-stocking fee but we will let you know about these items before we special order them so that you are aware of this. If this is the case we can always help with correct sizing so that we minimise the risk of return.

    For step-by-step instructions click here

Back to the top