The TransWeight integrated weight system consists of two weight pockets and two holsters. The system is a set of left and right pockets which install easily on the TransPac's or TransPlate's 2.0-inch waist strap webbing.
The pockets are angled forward, allowing you to quickly load the holsters containing the weights. Simply slide the holster into the pocket and pat down the VELCRO closures. By having the pockets load from the top rather than the front or the bottom, the Dive Rite system is both easy to ditch or hand off yet stays securely in place. Improved in Spring of 2005 to add a grommet on bottom for rapid drainage and an optional use 1-inch slide release.
The 32-lb Weight Pocket System is ideal for cold water diving where more weight is needed due to thick exposure protection. Each pocket consists of a pocket insert that holds the lead and fits inside the weight pocket holster. This set of right and left hand pockets are designed for use with the TransPac Harness or TransPlate Harness. The 32-lb Weight Pocket System mounts over the stainless steel side plates of the harness to weight the diver and aid with trim. The pockets are set at an angle, which helps the diver to easily slip the holster into the pocket with one hand while wearing the BC. The top-loading weight pocket gives added security that weight will stay in place, while the Velcro flap quickly releases allowing divers to quickly dump the weight or hand it off to a boat divemaster before climbing aboard a dive boat
Dimensions: 8.5" high x 6" wide x 1.5" deep