FREE UK SHIPPING ON PURCHASES OVER £50 ** 0% FINANCE ON ORDERS OVER £500 ** NEXT DAY DELIVERY AVAILABLE

Apeks XTX200 Second Stage

Available 3 - 4 days

To receive on, order within
0 day(s)
0 hr(s)
0 min
0 sec
Choose Next Day Delivery at checkout (in stock items)

  • Description

    The Apeks XTX200 second stage is a cold water rated, high performance second stage that uses a pneumatically balanced full metal valve for smooth breathing throughout the dive. The hose inlet is covered by a heat exchanger to help dissipate the cold generated by the valve and draw warmth in from the surround water to prevent the valve from freezing in extreme conditions.

    The diver has control over the sensitivity of the valve via a rotating control on the side. the valve can be de-sensitised from the factory / technician set default to allow for a personalised breathe. There is also control over the venturi effect within the housing via a via above the valve adjustment. This affects the flow of gas within the housing, providing optimal flow to the mouthpiece or diverting it back towards the diaphragm which helps to prevent freeflows.

    The XTX 200 housing is reversible, allowing a certified Apeks technican to switch the hose inlet from left to right.

    Suitable for coldwater use (below 10 C / 50 F).

    Compatible with EAN40 out of the box.

    Please note that this is a second stage only and does not include a hose. Order an Apeks, standard flexi hose here.

  • Features
    • Pneumatically-balanced second stage results in smooth, easy breathing.
    • The XTX purge buttons are large and easy to operate. A 2-stage progressive purge is used - press the purge on the side for a lower flow rate, useful where more control is required such as filling lift bags etc, then press in the centre for the full effect of the purge, i.e. when regulator clearing etc.
    • The large venturi lever has a soft touch rubber grip, which makes it easier to locate and use. The lever reduces the amount of grit ingress and therefore resists any possible friction giving a smooth operation.
    • Easy-to-grip opening effort control knob keeps the diver in control.
    • The second stage is manufactured with active protection against infection as all molded parts are produced with an additive that kills MRSA, protects against E-Coli, bacteria and fungi, and is also very effective against viruses, mould, yeast and algae.
    • A silicone exhaust valve improves the breathing performance of the regulator.
    • The Comfo-bite™ mouthpiece virtually eliminates jaw-fatigue.
    • A heat exchanger (patented) which surrounds the valve mechanism, dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water.
  • Reviews
  • Returns

    30 DAY RETURNS

    If you change your mind, it doesn’t fit, or you become inflicted with buyer’s regret - that's OK!

    Mike's Dive Store offer an extended returns policy of 30 days - so you can be rest assured if the suit, piece of diving equipment or gift doesn't suit then just send it back and we will either exchange it or offer a full refund less any postage costs. Too easy!

    Please note that there are some special order items on our website that will be subject to a 20% re-stocking fee but we will let you know about these items before we special order them so that you are aware of this. If this is the case we can always help with correct sizing so that we minimise the risk of return.

    For step-by-step instructions click here