A full range of Tek pockets have been designed to complement the WTX range. They can be attached to your WTX system or any other BC/Wing and/or drysuit. The system is modular so you can attach one pocket to the other if space is at a premium. A separate stainless steel hardware kit is available for this.
The Small Cargo Pocket can be fit to the front of the Large Cargo Pocket or directly to the WTX harness. It is an excellent size for carrying slates, floats, line markers or extra weights.
The Large Cargo Pocket has bellow construction, a zipper closure and capability to attach directly to waistband grommets. It can also slide over the harness waistband even after the diver is suited up.
- The hook n’ loop closure is easy and fail-safe.
- Internal loops for bungee cord attachment.
- Side attachment D-ring.
- 4 rear grommets allow the pocket to attach directly to the WTX harness waistband using hardware kit p/n 388018.
- Has two web loops to slide over standard two inch waistband webbing.
- Front pull D-ring for fast pocket access.
- Has a bottom drain grommet.
- Zippered closure for security
- Internal loops for bungee cord attachment
- 4 front grommets allow the smaller cargo pocket or the mesh pocket to be attached using screw and barrel set
- 4 rear grommets allow the pocket to attach directly to the WTX Harness waistband using hardware kit
- Has a large web loop to slide over a BC lobe and two smaller web loops to slide over standard two inch waistband webbing.
- Has a bottom drain grommet